All data is for information only------(Home)
PRODUCT DATA of Chemglaze H322
MaterialChemglaze H322
Product TypeHeat-activated, Electrically-conductive, Matt-black Coating
Chemical CompositionPolyurethane
Name of ManufacturerLord Corporation
111 Lord Drive, P.O.Box 8012, Cary, NC
27512-8012, USA
+1 919 468 5979
1 919 469 5777
www.lordcorp.com
Lord Corporation (Europe) Ltd
Barton Dock Rd., Stretford, Manchester M32 0ZH, UK
+44 (0)161 865 8048
44 (0)161 865 0096
EXPERIENCE IN PRACTICE
Development StatusCommercial Product
Cost RangeLow
Lot ReproducibilityFair
Equivalent DesignationsAeroglaze H322
Space ExperienceExtensive
PHYSICAL PROPERTIES
Solid Content25 %
Data Quality: Manufacturer's data
Viscosity500 cP
Data Quality: Manufacturer's data
Shelf Life6 month @ 20 20°C
ELECTRICAL PROPERTIES
Electrical surface resistance5000 ohm
@ 1V, nonconductive substrate
OPTICAL PROPERTIES
Hemispherical Emittance0.85
Remark: ECSS-Q-70-09
Solar Absorbtance0.95
Remark: ECSS-Q-70-09
RELEVANT PROPERTIES FOR USE IN SPACE COMMUNITY
UV Particle EffectsΔαs = -0.025
Test:3 Years/OTS spec
FlammabilityPass 21% O2. (on 1mm thick Aluminium foil)
Test:NASA NHB 8060-1B
Thermal CyclingPass
Test: ECSS-Q-70-04
Outgassing StatusOutgassing is informative. New test or alternative material
Coating: Hughson, Chemglaze H322
Outgassing(Avg data)TML = 1.6%, RML = 0.9%, CVCM = 0.04%
Test:ECSS-Q-70-02
SPECIAL RECOMMENDATIONS
Special RecommendationsRecommended cure: 15 mins. at 125°C after last layer + post cure 50 Hours at 100°C (Specification ECSS-Q-70-34). · Primer: Lesonol 01-66050 may be used for increased adhesion. · This paint (like most others) is not recommended for use in badly vented places where high electrical fields are present in the vicinity (corona risk). · Quality control tests according to ECSS-Q-70-02 are recommended. · Difficult to procure in Europe.